1. Manuals
  2. Brands
  3. Amana Manuals
  4. Ranges
  5. AGP200VDW
  6. Installation instructions manual

Amana AGP200VDW Installation Instructions Manual

20" (50.8 cm) freestanding gas range with standard clean oven
Hide thumbs Also See for AGP200VDW:
Table of Contents

Advertisement

Quick Links

Download this manual See also: Use and Care Manual
20" (50.8 CM) FREESTANDING GAS RANGE
IMPORTANT:
Save for local inspector's use.
Installer: Leave installation instructions with the homeowner.
Homeowner: Keep installation instructions for future reference.
W10459120A
INSTALLATION INSTRUCTIONS
with Standard Clean Oven

Table of Contents

RANGE SAFETY............................................................................. 2
INSTALLATION REQUIREMENTS ............................................... 4
Tools and Parts............................................................................ 4
Location Requirements ............................................................... 4
Gas Supply Requirements .......................................................... 6
INSTALLATION INSTRUCTIONS ................................................. 7
Unpack Range............................................................................. 7
Install Anti-Tip Bracket ................................................................ 7
Make Gas Connection................................................................. 8
Level Range ............................................................................... 10
Check Operation ....................................................................... 10
Check Operation of Oven/Broil Burner ..................................... 10
Complete Installation................................................................. 11
GAS CONVERSIONS ................................................................... 12
LP Gas Conversion.................................................................... 12
Pilot and Bypass Screws Conversion....................................... 14
Complete Conversion................................................................ 14
Natural Gas Conversion ............................................................ 14
Pilot and Bypass Screws Conversion....................................... 16
Complete Conversion................................................................ 16

Advertisement

Table of Contents
loading

Related Manuals for Amana AGP200VDW

Summary of Contents for Amana AGP200VDW

  • Page 1: Table Of Contents

    INSTALLATION INSTRUCTIONS 20" (50.8 CM) FREESTANDING GAS RANGE with Standard Clean Oven Table of Contents RANGE SAFETY................2 INSTALLATION REQUIREMENTS ..........4 Tools and Parts................4 Location Requirements ............... 4 Gas Supply Requirements ............6 INSTALLATION INSTRUCTIONS ..........7 Unpack Range................7 Install Anti-Tip Bracket ..............

  • Page 2: Range Safety

    RANGE SAFETY Your safety and the safety of others are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This is the safety alert symbol. This symbol alerts you to potential hazards that can kill or hurt you and others. All safety messages will follow the safety alert symbol and either the word “DANGER”...
  • Page 3 In the State of Massachusetts, the following installation instructions apply: Installations and repairs must be performed by a qualified or licensed contractor, plumber, or gasfitter qualified or licensed by the State of Massachusetts. If using a ball valve, it shall be a T-handle type. A flexible gas connector, when used, must not exceed 3 feet.

  • Page 4: Installation Requirements

    INSTALLATION REQUIREMENTS Tools and Parts Location Requirements Gather the required tools and parts before starting installation. IMPORTANT: Observe all governing codes and ordinances. Do not obstruct flow of combustion and ventilation air. Read and follow the instructions provided with any tools listed here.
  • Page 5 Product Dimensions Cabinet Dimensions Freestanding Range Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm) countertop height. If the cabinet depth is greater than 24" (61.0 cm), oven frame must extend beyond cabinet fronts by ½"...

  • Page 6: Gas Supply Requirements

    Gas Supply Requirements Flexible metal appliance connector: WARNING If local codes permit, a new CSA design-certified, 4-5 ft (122-152.4 cm) long, ½" (1.3 cm) or ¾" (1.9 cm) I.D., flexible metal appliance connector may be used for connecting range to the gas supply line. A ½"...

  • Page 7: Installation Instructions

    Burner Input Requirements Gas Supply Pressure Testing Input ratings shown on the model/serial rating plate are for Gas supply pressure for testing regulator must be at least 1" elevations up to 2,000 ft (609.6 m). water column pressure above the manifold pressure shown on the model/serial rating plate.

  • Page 8: Make Gas Connection

    3. Determine and mark centerline of the cutout space. The mounting can be installed on either the left side or right side Make Gas Connection of the cutout. Position mounting bracket against the wall in the cutout so that the V-notch of the bracket is 7⁷⁄₈" (20 cm) WARNING from centerline as shown.

  • Page 9: Verify Anti-Tip Bracket Is Installed And Engaged

    3. Use a combination wrench and pliers to attach the flexible 4. Test all connections by brushing on an approved connector to the adapters. Check that connector is not noncorrosive leak-detection solution. Bubbles will show a kinked. leak. Correct any leak found. 5.

  • Page 10: Level Range

    6. Repeat steps 1 and 2 to ensure that the range foot is 7. Slowly lower the cooktop until it snaps into position. engaged in the anti-tip bracket. 8. Push in and turn each surface burner control knob to the “HI” If the rear of the range lifts more than ½"...

  • Page 11: Complete Installation

    3. Remove the fasteners holding the flame spreader. Lift and 2. Open oven door and remove oven racks, oven bottom tray, pull out the flame spreader. flame spreader and set aside. A. Oven bottom tray A. Oven bottom tray B. Fasteners B.

  • Page 12: Gas Conversions

    GAS CONVERSIONS WARNING LP Gas Conversion WARNING Explosion Hazard Use a new CSA International approved gas supply line. Install a shut-off valve. Securely tighten all gas connections. Tip Over Hazard If connected to LP, have a qualified person make sure A child or adult can tip the range and be killed.
  • Page 13 3. Remove the cap from the gas pressure regulator using a 7. Remove the natural gas orifice spuds from the valve using a ³⁄₈" (9.5 mm) combination wrench. flat-blade screwdriver. NOTE: Do not remove the spring beneath the cap. A. Cap 4.

  • Page 14: Pilot And Bypass Screws Conversion

    12. Install the LP gas pilot screw with a flat-blade screwdriver, turning clockwise. Pilot and Bypass Screws Conversion 13. Replace the front panel and screw bottom and top fasteners 1. Remove control knobs and set aside. in place. 2. Remove upper grates. 14.
  • Page 15 2. Open broiler door and remove broiler pan. The gas pressure 3. Remove the screws that attach each dual burner. regulator is located in the back right hand corner of the broiler 4. Lift each burner and slip it back to remove it. compartment.

  • Page 16: Pilot And Bypass Screws Conversion

    6. Place LP gas oven burner spud in plastic parts bag along 8. Remove the LP gas bypass screw with a flat-blade with LP gas cooktop burner spuds for future use and keep screwdriver, turning counterclockwise. with the bag containing literature. 7.

Table of Contents