Vf Set Menu - Sony PMW-300K2 Operating Instructions Manual

VF SET Menu

VF SET
Menu items Subitems and setting values Contents
VF Color
Setting the
viewfinder
Mode
Peaking Type
Setting the peaking
function for the
viewfinder
Peaking Frequency
Color
Peaking Level
Marker
Setting
Setting the
markers added to
Safety Zone
pictures on the
viewfinder screen
Safety Area
[M]
Center Marker
Aspect Marker
Aspect Select
Aspect Mask
Guide Frame
92 Setup Menu List
–99 to +99 (±0)
Color / B&W
Normal / Color / Both
Normal / High
White / Red / Yellow / Blue
Low / Mid / High
On / Off
On / Off
80% / 90% / 92.5% / 95%
On / Off
Line / Mask / Off
4:3 / 13:9 / 14:9 / 15:9 / 1.66:1 /
1.85:1 / 2.35:1 / 2.4:1
90% / 80% / 70% / 60% / 50% /
40% / 30% / 20% / 10% / 0%
On / Off
Adjust the color of pictures in the viewfinder.
Select the display mode of the viewfinder.
Color: Color mode
B&W: Monochrome mode
Select the peaking type.
Normal: Normal peaking
Color: Color peaking
Both: "Normal" and "Color"
Select the peaking frequency between "Normal" and "High"
when "Type" is set to "Normal."
When you select "Color" for "Type," select the color of the
peaking signal.
Set the color peaking level when "Type" is set to "Both."
Turn all marker indications on/off in combination.
Turn the safety marker on/off.
Select the size (ratio to the entire screen) of the safety zone
marker.
Turn the center marker on/off.
Select the aspect marker.
Line: To show white lines
Mask: To lower the video signal level of areas outside the
marker range.
Off: To not display
Note
No aspect marker is displayed when a video format of EC
(Edge Crop) is selected in SD Mode.
Select the ratio of the aspect marker.
When "Aspect Marker" is "Mask," select the brightness of
images outside the aspect marker.
Turn the guide frame marker on/off.