Job#30: Format Cartridge - Yamaha RX7 Authorized Product Manual

* If data has not been saved correctly, an error message
will appear instead. Refer to the section ERROR MES-
SAGES.
JOB #30: FORMAT CARTRIDGE
FUNCTION
Formats a RAM4 Data Cartridge for use with
the RX7.
Any new RAM4 Data Cartridge (or one that has been pre-
viously used with other equipment) has to be formatted with
this Job before it can used with the RX7.
Make sure that the cartridge is inserted correctly, with the
MEMORY PROTECT switch set to OFF.
* Formatting a cartridge which already contains data will
completely erase all such data.
OPERATION
1. In Cartridge Control mode, select Job #30.
The display will ask
2. Press +1/YES.
The display will ask you to confirm:
3. If you are, press +1/YES again.
After "executing", the LCD will display
* If formatting was not carried out successfully, the message
will appear. In this case, repeat formatting.
45