Song Copy; Song Clear; Jobs; Job#01: Mark/Part Search - Yamaha RX7 Authorized Product Manual

2. Press numeric key 1 to select Up or key 2 for Down.
3. Input the degree (value) of volume change with the nu-
meric keys.

SONG COPY

FUNCTION
Copy entire Songs to another location. Useful
when you want to alter a Song while retaining
the original version.
OPERATION
1. Select the SONG you want to copy and press COPY.
The LCD will ask you to input the copy destination
number (new Song location).
2. Enter the destination number with the numeric keys, then
press + 1/YES to copy.
The message "completed!" shows that copying has been
carried out.
* Should you decide to copy a different Song after having
specified the copy destination, move the cursor to the
upper LCD line with ACCENT 2 and enter a different
Song number.
* If the specified copy destination already contains a Song,
this Song will be erased to make room for the new Song.
To avoid mistakes, the LCD asks
if the copy destination is occupied. You can now cancel
Song Copy with the - 1/NO key or execute copying with
the + 1/YES key.

SONG CLEAR

FUNCTION
Erase entire Songs.
* It is also possible to clear all 20 Songs simultaneously
with UTILITY Job #06.
OPERATION
1. Select the Song you want to erase and press CLEAR.
20
2. Press + 1/YES. The LCD will ask
3. Press + 1/YES to confirm (or - 1/NO to cancel Song
Clear).
After displaying the message "completed!", the LCD
will show the cleared Song location.

JOBS

The Song functions listed on the extreme left of the front
panel Job Menu under SONG and EDIT SONG are selected
by entering the respective Job number, i.e. by pressing JOB
and then inputting a two-digit number with the numeric keys.
Except for Job #01, Mark Search, which is also available in
Song Selection mode, these Jobs can only be accessed during
Edit Song mode.
JOB #01: MARK/PART SEARCH
FUNCTION
Instantly locate a specified point in a Song.
A very useful feature both for playback and
editing, this lets you instantly locate any Part
in a Song or a location marked according to
Job #02.
OPERATION
1. Select Job #01.
The lower line of the display will ask you to input the
Pattern or Mark you want to locate.
2. a: PART SEARCH
If you are looking for a certain Part, enter its
three-digit number with the numeric keys. As soon
as the first digit is input, the display will change to
After all three digits have been entered correctly,
the Part you were looking for will appear on the
display.