Table of Contents
Advertisement
H
o
w
2.4
Programming Toggle (ON/OFF) Option Sections
Some programming sections contain several toggle options. The panel will use zone lights 1 through 8 to
indicate if the different options are enabled or disabled. Press the number corresponding to the option to turn
it ON or OFF. Once all the toggle options have been selected correctly, press the [#] key to exit the section
and save the changes. The Ready light will turn OFF and the Armed light will turn ON.
Refer to Section 5 in this manual to determine what each option represents and whether the light should be ON
or OFF for your application.
2.5
Reviewing Programming
Programming sections can be reviewed from the desktop control unit. After you have programmed a section,
when that programming section is entered, the control unit will immediately display the first digit of information
programmed in that section.
The control unit will display the information using a binary format, where:
Zone Light 1 = 1
Add up the values for the zone lights to determine the digit being displayed (for example, no zone lights = 0,
all 4 zone lights = 15 HEX 'F').
To view the next digit without changing the programming, simply enter the same digit as is being displayed
(example: control unit displays zone lights 1 and 2, representing the digit 3. Enter 3 and the next digit will be
displayed.).
When all the digits in a section have been viewed, the panel will exit the section; the Ready Light will turn OFF
and the Armed light will turn ON, waiting for the next two digit programming section number to be entered.
Press the [#] key to exit the section.
t
o
p
Zone Light 2 = 2
3
r
o
g
Zone Light 3 = 4
r
a
m
Zone Light 4 = 8
Advertisement
Table of Contents
