Touch Panel Adjust; Clock - Kenwood KVT-915DVD Instruction Manual

Setup Menu

Touch Panel Adjust

You can adjust the touch panel operations.
1 Display the Touch Panel Adjust screen
Touch
If is not shown, touch
Touch
Prev.
or to display it.
Next
4
1
3
Set
2
1
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (see page 86)
4 Calls the Setup Menu.
5 Allows you to start touch panel adjustment.
2 Start to adjust the touch panel
Set
1
2
Cancel Reset
1 Cancels the adjustment and returns to the Touch
Panel Adjust screen.
2 Resets to the initial status.
76 English
3 Adjustment
Touch the center of left lower and right upper
when requested.
1
5
1

Clock

Adjusts the clock time
1 Display the Clock Screen
Clock
If is not shown, touch
Clock
Prev.
or to display it.
Next
4
MENU
1
3
6 7
AM 11:18
5
8
2 Reset
7
6
RDS Synchronize Off
9
1
Clock
1 Adjusts the volume.
2 Returns to the Control screen of the previous
source.
3 Calls the Sound Effects Menu. (see page 86)
4 Calls the Setup Menu.
5 Clock time display.
6 Adjusts hours.
7 Adjusts minutes.
8 Sets "00" minute.
Setup examples: 3:00~3:29 → 3:00
3:30~3:59 → 4:00
9 Sets the clock time in synchronous with the time
data sent from the RDS station. ( Off)
When turned "On", the synchronous mode starts
and the clock cannot be adjusted manually.
2 Adjust the clock time
1
1
English 77