ZyXEL Communications VMG892-B10A User Manual page 85

Table 21 Network Setting > Wireless > More AP > Edit (continued)
LABEL
Wireless
Network Name
(SSID)
Max clients
Hide SSID
Enhanced
Multicast
Forwarding
Guest WLAN
Access
Scenario
Maximum
Upstream
Bandwidth
Maximum
Downstream
Bandwidth
BSSID
E-mail notification when the wireless guest visit
Enable Email
Notification
Mail Server
Email Title
Send
Notification to
Email
Security Level
Security Mode
Apply
Cancel
VMG8924-B10A and VMG8924-B30A Series User's Guide
DESCRIPTION
The SSID (Service Set IDentity) identifies the service set with which a wireless device is
associated. Wireless devices associating to the access point (AP) must have the same SSID.
Enter a descriptive name (up to 32 English keyboard characters) for the wireless LAN.
Specify the maximum number of clients that can connect to this network at the same time.
Select this check box to hide the SSID in the outgoing beacon frame so a station cannot
obtain the SSID through scanning using a site survey tool.
Select this check box to allow the Device to convert wireless multicast traffic into wireless
unicast traffic.
Select this to create Guest WLANs for home and external clients. Select the WLAN type in
the Access Scenario field.
If you select Home Guest, clients can connect to each other directly.
If you select External Guest, clients are blocked from connecting to each other directly.
Specify the maximum rate for upstream wireless traffic to the WAN from this WLAN in
kilobits per second (Kbps).
Specify the maximum rate for downstream wireless traffic to this WLAN from the WAN in
kilobits per second (Kbps).
This shows the MAC address of the wireless interface on the Device when wireless LAN is
enabled.
Select this to have the Device e-mail you a notification when a wireless client is connected
to the wireless network.
Select a mail server for the e-mail address specified below.
If you do not select a mail server, e-mail notifications cannot be sent via e-mail. You must
have configured a mail server already in the Maintenance > Email Notification screen.
Type a title that you want to be in the subject line of the e-mail notifications that the Device
sends.
Notifications are sent to the e-mail address specified in this field. If this field is left blank,
notifications cannot be sent via e-mail.
Select Basic (WEP, 802.1X) or More Secure (WPA(2)-PSK, WPA(2)) to add security
on this wireless network. The wireless clients which want to associate to this network must
have same wireless security settings as the Device. After you select to use a security,
additional options appears in this screen.
Or you can select No Security to allow any client to associate this network without any data
encryption or authentication.
See Section 6.2.1 on page 77
Click Apply to save your changes.
Click Cancel to exit this screen without saving.
for more details about this field.
Chapter 6 Wireless
85