Playback of disc
16
Basic play
Preparation
MAIN UNIT
÷ Set the POWER ON/OFF switch to the ON (
÷ After the power is switched ON, there is a delay of about
3 seconds before the display is lit.
1
Load a disc.
1
Open the tray.
MAIN UNIT
2
Place a disc.
3
To set a disc to a different disc tray, press the DISC
SKIP key to change the position of the disc tray.
MAIN UNIT
DISC SKIP
2
Start playback.
MAIN UNIT
6
÷ When the 6 key is pressed while a tray is open, the
tray closes automatically, and then playback begins.
When a Disc Menu appears on the screen
Note
Note
In case of interactive DVDs, a Disc Menu appears on the
screen. Then press ENTER to select specific menu you
want to play by using Cursor keys.
To stop playback
MAIN UNIT
7
POWER
ON
OFF
) position.
REMOTE
REMOTE
6
REMOTE
7
Using the On-screen banner display
DISC SKIP key
TOP MENU key
7 (Stop) key
6 (Play/Pause) key
Label side
TITLE No. (DVD)
CHAPTER No. (DVD)
TRACK No. (CD/VCD)
÷ Each press pauses and plays the disc alternately.
When a menu screen is recorded on
the disc, the menu screen will be
displayed when the TOP MENU key
or MENU key is pressed. At the menu
screen, the menu can be selected by
pressing the Cursor keys.
RESUME playback
When the 7 (Stop) key has been pressed once during
playback to stop the playback, and then playback is
started again, play will start from the point where the
playback had been stopped. This is called the RE-
SUME function. When the 7 (Stop) key is pressed
again during stop, the RESUME function is cancelled.
RESUME is cancelled when 5 minutes have passed in
RESUME status.
DV-605/DVF-R5060 (EN/K,P,E,T,X,Y)
6 (Play/Pause) key
DISC SKIP key
POWER ON/ OFF switch
7 (Stop) key
Disc tray
0 (open/close) key
Time display
TOP MENU