Playback Of Disc; Basic Play - Kenwood DV-603 Instruction Manual

Playback of disc

16

Basic play

Preparation
MAIN UNIT
÷ Set the POWER ON/OFF switch to the ON (
÷ After the power is switched ON, there is a delay of about
3 seconds before the display is lit.
1
Load a disc.
MAIN UNIT
1
Open the tray.
2
Place a disc.
2
Start playback.
MAIN UNIT REMOTE
DV-603/DVF-3060
6
÷ When the 6 key is pressed while a tray is open, the
tray closes automatically, and then playback begins.
When a Disc Menu appears on the screen
Note Note In case of interactive DVDs, a Disc Menu appears on the
screen. Then press ENTER to select specific menu you
want to play by using Cursor keys.
To stop playback
MAIN UNIT REMOTE
DV-603/DVF-3060
7
POWER
ON OFF
) position.
0
DVF-3060K
6
DVF-3060K
7
Using the On-screen banner display
DV-603/DVF-3060 DVF-3060K
TOP MENU key
7 (Stop)
key
7 (Stop) key
6 (PLAY/PAUSE) key
TITLE No. (DVD)
CHAPTER No. (DVD)
TRACK No. (CD/VCD)
÷ Each press pauses and plays the disc alternately.
When a menu screen is recorded on the disc, the
menu screen will be displayed when the TOP
MENU key or MENU key is pressed. At the menu
screen, the menu can be selected by pressing the
Cursor keys.
DV-603/DVF-3060
TOP MENU
RESUME playback
When the 7 (Stop) key has been pressed once during
playback to stop the playback, and then playback is
started again, play will start from the point where the
playback had been stopped. This is called the RE-
SUME function. When the 7 (Stop) key is pressed
again during stop, the RESUME function is cancelled.
RESUME is cancelled when 5 minutes have passed in
RESUME status.
DV-603/DVF-3060/DVF-3060K (EN/K,P,E,T,M,X,Y)
6 (Play/Pause) key
TOP MENU key
POWER ON/ OFF switch
Disc tray
0 (open/close) key
7 (Stop) key
6 (Play/Pause) key
Label side
Time display
DVF-3060K