Table of Contents
Advertisement
now be selected using the preset buttons.
Automatic preset storage can be cancelled
using EXIT.
Auto mode is cancelled by pressing for exam-
ple AUTO or FM.
Returning to Auto mode provides access to the
autostored presets:
1. Press AUTO.
>
Auto
appears on the display.
2. Press a preset button.
Scan wavelength
The function automatically searches the cur-
rent wavelength for strong stations. When a
station is found, it is played for approx. 8 sec-
onds before scanning is resumed.
1. Select wavelength using AM or FM.
2. Press SCAN.
SCAN
appears on the display. Close using
SCAN or EXIT.
RDS functions
RDS (Radio Data System) links FM transmitters
into a network. An FM transmitter in such a
network sends information that gives an RDS
radio the following functions:
•
Automatically switches to a stronger trans-
mitter if reception in the area is poor.
•
Searches for programme type, such as
traffic information or news.
•
Receives text information on current radio
programme.
NOTE
Some radio stations do not use RDS or only
some if its functionality.
If a required programme type is located the
radio can switch stations interrupting the audio
source currently in use. For example, if the CD
player is in use, it is paused. The interrupting
transmission is played at a preset volume, see
page 151. The radio returns to the previous
audio source and volume when the set pro-
gramme type is no longer broadcast.
The programme functions alarm (
traffic information (
TP (Traffic information)
news (
News
), and programme types (
(Program type)
) interrupt one another in order
of priority, where alarm has the highest priority
and programme types has the lowest. For fur-
ther programme interruption settings (
and
Regional
), see page 150. Press EXIT to
return to the interrupted audio source.
04 Comfort and driving pleasure
Alarm
This function is used to warn of serious acci-
dents and catastrophes. The alarm cannot be
temporarily interrupted or deactivated. The
message
ALARM!
when an alarm message is transmitted.
Traffic information – TP
This function allows traffic information sent
within a set station's RDS network to break
TP (Traffic information)
through. The
indicates that the function is activated. If the
set station can send traffic information then
appears on the display.
±
Activate/deactivate under
TP (Traffic
TP from current station/all stations
The radio can interrupt with traffic information
from only the set (current) station or from all
stations.
ALARM!
),
),
±
Go to
FM settings
PTY
settings
News
This function allows news broadcasts sent
EON
within a set station's RDS network to break
through. The
NEWS
function is active.
Audio system
appears on the display
symbol
FM settings
information).
Advanced radio
TP Station...
to change.
symbol indicates that the
04
``
149
Advertisement
Table of Contents
