Table of Contents
Advertisement
04 Comfort and driving pleasure
Audio system
car. The level of compensation can be set at
low, medium or high. Select the level under
Audio settings
Auto. volume
External audio source audio volume
The AUX input can be used for connecting an
MP3 player which has no USB connection for
example, see page 145.
NOTE
The audio quality may be impaired if the
04
player is charged while the audio system is
in AUX mode. In which case, avoid charging
the player via the 12 V socket.
The audio source connected to the AUX input
may have a different volume to the internal
audio sources. Correct this by adjusting the
input volume of the AUX input:
1. Set the audio system in AUX mode using
the MODE button, press MENU and navi-
gate with (4) to
AUX input volume
page 142.
2. Turn the SOUND control or press
the navigation button, see page 142.
2
Only High Performance and Premium Sound.
*
144
Option/accessory, for more information, see Introduction.
Audio controls
Press the control SOUND repeatedly to
control.
browse among the following listed options.
Adjustment is made by turning the control.
NOTE
Press MENU to access the audio settings.
For more information, see page 124.
•
Bass
- Bass level.
•
Treble
- Treble level.
•
Fader
– Balance between the front and
rear speakers.
•
Balance
– Balance between the left and
right-hand speakers.
•
Subwoofer
the control
tivates the Subwoofer.
•
Surround
, see
Surround
Under
Surround Pro Logic II can be activated by
3-ch
selecting
/
bles the following options:
•
Centre level
•
Surround level
* - Bass speaker level. Turning
anticlockwise to
Min
deac-
* – Surround settings.
3 channel stereo or Dolby
Dpl2
or
respectively. This ena-
* – Level for centre speaker.
* – Level for surround.
Equalizer
2
The equalizer
can be used to adjust different
frequency bands separately.
1. Go to
Audio settings
and select
Equalizer front
or
Equalizer rear
The sound level for the wavelength is
adjusted with
/
on the navigation but-
ton. Press
/
to select another wave-
length.
2. Use ENTER to save or EXIT to close.
Sound stage
The sound experience can be optimised for the
driver's seat*, both front seats or the rear seat.
Select one of the options under
Audio settings
Sound
stage.
Optimum sound reproduction
The audio system is calibrated for optimum
sound reproduction by means of digital signal
processing.
This calibration takes into account loudspeak-
ers, amplifiers, passenger compartment
acoustics, listener position etc. for each com-
bination of car model and audio system.
There is a also a dynamic calibration that takes
into account the position of the volume control,
radio reception and vehicle speed.
.
Advertisement
Table of Contents
