Installing Drivers And Software; Installing An Operating System; Installing System Drivers - Zotac ZBox User Manual

Installing drivers and software

Installing an operating system

The ZOTAC ZBOX nano does not ship with an operating system preinstalled. The
user must install the operating system before the ZOTAC ZBOX nano can be used.
The following operating systems are supported:
• Windows 7
• Windows 8
Follow the instructions below to install an operating system:
1. Attach external DVD drive via USB.
2. Insert disk for operating system
3. Wait for the ZOTAC ZBOX nano to boot from the disk.
4. Follow the onscreen directions to install the operating system.
5. Install system drivers to gain full functionality of the ZOTAC ZBOX nano
hardware and features.

Installing system drivers

Before you can use the full features of the ZOTAC ZBOX nano, the system drivers
must be installed. The following types of operating systems are supported by the
ZOTAC ZBOX nano driver DVD:
• Windows 7
• Windows 8
Follow the instructions below to install the system drivers:
1. Insert the ZOTAC ZBOX nano driver DVD. If autorun is enabled, the driver
installation main menu will show up automatically.
Note: If autorun is disabled, you can click the file Launch.EXE to bring up the driver installation main
menu.
2. The following drivers are available on the DVD:
• Intel Chipset Driver
• HDA Sound Driver
• Intel Graphics Driver
• Ethernet PCI-E Driver
• USB 3.0 Controller Driver
• Intel Management Engine
• Wireless Network Driver
• CIR Driver
• Bluetooth Driver
• MassStorage Driver
• USB Charger (optional)
Note: If you want to use USB charger for iPhone/iPad, please install the driver
at X:\Utility\Software\Usb Charger\setup.exe (X: your driver disk letter).
ZOTAC ZBOX nano
21