Welcome To Follett Corporation; Important Cautions - Follett 12 Series Installation, Operation And Service Manual

Welcome to Follett
Follett equipment enjoys a well-deserved reputation for excellent performance, long-term reliability and
outstanding after-the-sale support. To ensure that this equipment delivers that same degree of service, we
ask that you review the installation portion of this manual before beginning to install the unit. Our installation
instructions are designed to help you achieve a trouble-free installation. Should you have any questions or
require technical help at any time, please call our technical service group at (610) 252-7301.
Before you begin
After uncrating and removing all packing material, inspect the equipment for concealed shipping damage. If
damage is found, notify your shipper immediately and contact Follett Corporation for help in fi ling a claim, if
necessary.
Check your paperwork to determine which model dispenser you have. Follett model numbers are designed to
provide information about the type and capacity of Follett ice dispensing equipment. Following is an explanation
of model numbers.
E12CI400A
!

Important cautions

• Do NOT tilt any unit farther than 30° off vertical plane during uncrating or installation.
• Dispenser bin area contains mechanical, moving parts. Keep hands and arms clear of this
area at all times. If access to this area is required, power to unit must be disconnected fi rst.
• Follett recommends installation of an activated carbon fi lter in icemaker inlet water line.
• Ice is slippery. Maintain counters and fl oors around dispenser in a clean and ice-free condition.
• Ice is food. Follow recommended cleaning instructions to maintain cleanliness of delivered ice.
• Do not block right side air intake or top air exhaust.
• Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction.
• Do NOT use mechanical devices or other means to accelerate the defrosting process.
• To avoid a hazard due to instability of the appliance it must be fi xed according to instructions.
• The appliance must be positioned so the plug is accessible.
• If the cord is damaged it must be replaced by special service agent.
Condenser type, A = air-cooled
Icemaker capacity in lbs per day
Icemaker location, I = integral
Dispenser confi guration, C = countertop, H = wall mount
Approximate storage capacity in lbs
Alternate voltage – C = 220V 60Hz
– E = 230V 50Hz
3