Text Scroll; Built-In Auxiliary Input Setting; Power Off Timer; Cd Read Setting - Kenwood KDC-W7031 Instruction Manual

Text Scroll

Setting the displayed text scroll.
Display Setting
"Scroll : Manual" Doesn't scroll.
"Scroll : Auto" Scrolls when the display changes.
• The text scrolled is shown below.
- CD text
- Folder name/ File name/ Song title/ Artist name/
Album name
- MD title
- Radio text
Function of the KDC-W8531/KDC-W7531
In Standby mode

Built-in Auxiliary input Setting

Set the Built-in Auxiliary Input function.
Display Setting
"Built in AUX : OFF" When selecting the source there's no Auxiliary
Input.
"Built in AUX : ON" When selecting the source there's Auxiliary
Input.
In Standby mode

Power OFF Timer

Setting the timer to turn this unit's power OFF
automatically when Standby mode continues.
Using this setting can save the vehicle's battery
power.
Display Setting
"Power OFF :– – – –" Power OFF Timer function is OFF.
"Power OFF 20min" Turns the power OFF after 20 minutes.
(Original setting)
"Power OFF 40min" Turns the power OFF after 40 minutes.
"Power OFF 60min" Turns the power OFF after 60 minutes.
• This setting is done after setting <Security Code>
(page 34).
In Standby mode

CD Read Setting

When there is a problem on playing a CD with
special format, this setting play the CD by force.
Display Setting
"CD Read : 1" Play CD and Audio file.
"CD Read : 2" Play CD by force.
• Setting "CD Read : 2" cannot play Audio file.
Some music CDs may not be played back even in the
"CD Read : 2" mode.
41
|
English