Terminal Setup; Setup Process For Internet Connected Terminals - VeriFone Omni 3740 Operator's Manual

3. Key Parameters
This menu item displays some of the configuration values that are important to a correct terminal
setup. Press 5 from "Manager Functions" menu to enter this screen, then the following parameters
will be displayed on the screen:
Press the PF4 button (4th purple button from the left) will print more parameters that may be useful
for troubleshooting problems.
4. Dial Test
This function allow a test dialup transaction to be performed. Take the following steps:
From "Manager Functions" menu, press 6 to enter Dial Test menu
•
Press 1 to perform a dial transition using the primary phone #, or press 2 to perform a dial
•
transaction using the secondary phone #.
If there is a dial prefix value already being set up, the dial prefix value is used.
•
If the dial test fails for whatever reason, an error message describing the failure is displayed on the
•
screen, otherwise a message "Dial primary(secondary) # passed" is displayed.
Press any key to go back to Manager Functions menu
•

Terminal Setup

This section outlines the steps that are needed just prior to a download of new software. This is not a common
occurrence and is typically done with the assistance of a Paytronix customer representative.

Setup Process for Internet Connected Terminals

The steps to set-up the Verifone terminal are:
1. Plug an Ethernet cable into the 10BaseT port of the terminal.
2. Plug the power cable into the terminal.
3. The terminal will start to boot. If you are prompted to choose Credit Card software or Paytronix software,
choose Paytronix (usually the second or third item in the list).
4. The terminal will prompt for a user PIN. Enter 999999 (six nines), and hit "enter".
5. The terminal will prompt for your merchant ID. Do not guess! This must be entered correctly or the
terminal will not work.
6. The terminal will prompt for a store code. Do not guess! This must be entered correctly or the terminal will
not work.
7. The terminal will prompt for a terminal ID. You may enter any numeric value here, but it should be some
meaningful value identifying the terminal within the store. For example, if you have two cash registers, each
with a terminal, one terminal might have terminal ID "1" and the other "2". Enter an ID number and press
"enter".
8. The terminal will ask how it is to connect to the Paytronix servers. Select LAN Ethernet and hit "enter".
Since Paytronix is using the Comm Server application to determine the network information, it will try to
connect right after you hit enter. If this fails for any reason, you can start it again by using the Manual Sys.
Refresh function from the Manager Functions menu in the Paytronix application.
9. Once the download is complete, you will be presented with a menu of functions. Now you must change the
Store Manager PIN from 999999 to a more secure value. To do this:
a. Choose Manager Functions.
b. Choose User Management.
c. Choose Edit User.
d. Choose Store Manager.
e. Choose Change PIN.
f. Enter a new PIN for the store manager user. Do not leave this PIN at 999999, as it is an easily
guessed PIN.
Paytronix Systems Inc. Confidential
Verifone Terminal - Paytronix POS Operator Guide
Merchant ID = xx
Store Code = xx
S/N = xxx-xxx-xxx
Connectivity = IP (or Dial)
Page 11 of 12