Table of Contents
Advertisement
Menu system
In Standby mode
Built-in Auxiliary input Setting
Set the Built-in Auxiliary Input function.
Display
Setting
"Builtin AUX:OFF" When selecting the source there's no Auxiliary
Input.
"Builtin AUX:ON" When selecting the source there's Auxiliary Input.
In Standby mode
CD Read Setting
When there is a problem with playing a CD with
special format, this setting plays the CD by force.
Display
Setting
"CD Read:1"
Play CD and Audio file.
"CD Read:2"
Play CD by force.
• Setting "CD Read:2" cannot play Audio file.
Some music CDs may not play even in the "CD
Read:2" mode.
Function of ACDrive disc
Voice Index
Setting the announcement during the play of
ACDrive disc.
Display
Setting
"Voice Index:ON"
Guide is announced.
"Voice Index:OFF"
Not be announced.
In CD mode
ACDrive firmware version display
Displaying the firmware version with the ACDrive
function.
1
Select the firmware version display mode
Push the Control knob towards [FM] or [AM].
Select the "ACD F/W Version" display.
2
Display the ACDrive firmware version
Push the Control knob towards [4] or
[¢].
34
|
English
In CD mode
Unique ID display
Displaying the serial number for each product.
1
Select the unique ID display mode
Push the Control knob towards [FM] or [AM].
Select the "ACD Unique ID" display.
2
Display the unique ID
Push the Control knob towards [4] or
[¢].
Audio Preset Memory
Registering the value setup by Sound Control. The
memory cannot be erased by the Reset button.
1
Setup Sound Control
Refer to the following operations to setup the
Sound Control.
- <Audio Control> (page 11)
- <Audio Setup> (page 12)
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
"Menu" is displayed.
3
Select Audio Preset mode
Push the Control knob towards [FM] or [AM].
Select the "Audio Preset" display.
4
Enter Audio Preset mode
Press the Control knob for at least 1 second.
5
Select the Audio Preset Memory
Push the Control knob towards [FM] or [AM].
Select the "Memory" display.
6
Put the Audio Preset in the memory
Press the Control knob for at least 2 seconds.
The "Memory" display blinks 1 time.
7
Exit Menu mode
Press the [MENU] button.
• Register 1 pair of Audio Preset Memory. You cannot
register by the source.
• When you press the Reset, all the sources will be the
setting value which is registered.
• The following items cannot be registered.
Volume, Balance, Fader, Loudness, Volume offset, Dual
Zone System, Rear Volume
Advertisement
Table of Contents
