Function Description - BenQ MP776 User Manual

Function
Picture Mode
Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness
Brilliant Color
Color
Temperature
3D Color
Management
Save Settings
Quick Auto
Search
Color Space
Conversion
48 Operation
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
picture mode" on page 32
Selects a picture mode that best suits your need for the image quality
and further fine-tune the image based on the selections listed on the
same page below. See
details.
Adjusts the brightness of the image. See
33 for details.
Adjusts the degree of difference between dark and light in the image. See
"Adjusting Contrast" on page 33
Adjusts the color saturation level -- the amount of each color in a video
image. See "Adjusting Color" on page 33
This function is only available when a Video, S-Video or
Component Video signal is selected and the system format is
NTSC or PAL.
Adjusts the red and green color tones of the image. See
on page 33 for details.
This function is only available when a Video or S-Video signal is
selected and the system format is NTSC.
Adjusts the image to make it look sharper or softer. See
Sharpness" on page 33
This function is only available when a Video, S-Video or
Component Video signal is selected and the system format is
NTSC or PAL.
See "Adjusting Brilliant Color" on page 34
There are four color temperature settings available. See
color temperature" on page 34
See "3D Color Management" on page 34
Saves the settings made for User 1 or User 2 mode.
See "Switching input signal" on page 29
See "Changing Color Space" on page 29
Description
for details.
"Setting the User 1/User 2 mode" on page 32
"Adjusting Brightness" on page
for details.
for details.
for details.
for details.
for details.
for details.
for details.
for details.
"Selecting a
for
"Adjusting Tint"
"Adjusting
"Selecting a