Setting The Date And Time - Canon EOS 5D Instruction Manual

Setting the Date and Time
Set the date and time as shown below.
Select [Date/Time].
Turn the <
0
> dial to select
[f1
Datel
Time], then press
<8>.
The date/time screen will appear.
Set the date and time.
Pressing the
<
8
> button toggles the
orange box between
D
and
¢.
With the
D
box displayed, turn the
<
0
>
dial to select the date or time to
be corrected, then press <
8
>.
With the
¢
box displayed, turn the
<
0
>
dial to select the correct
numeral, then press
<8>.
Confirm the setting.
With the
D
box displayed, turn the
<
0
>
dial to select [OK], then press
<8>·
The date/time will be set and the
menu will reappear. The minute that
was set will then start from 0 sec.
o
Each captured image is recorded with the date and time it was taken. If the
date and time are not properly set, the wrong date/time will be recorded.
Make sure you set the date and time correctly.
40