Auto Exposure Bracketing (Aeb) - Canon EOS 5D Instruction Manual

Auto Exposure Bracketing (AEB)
*
By changing the shutter speed or aperture automatically, the camera
brackets the exposure up to ±2 stops in 1/3-stop increments for three
successive shots. This is called Auto Exposure Bracketing (AEB).
Standard exposure Decreased exposure Increased exposure
AEB amount
Standard exposure
Decreased exposure
Increased exposure
Select [AEB].
Turn the <
0
> dial to select
[Q
AEB], then press <8>.
Set the AEB amount.
Turn the <
0
> dial to set the AEB
amount, then press <8>.
When you exit the menu,
<~>
and
the AEB level will be displayed on the
LCD panel.
Take the picture.
The three bracketed shots will be
exposed in the following sequence:
standard exposure, decreased
exposure, and increased exposure.
As shown on the left, the respective
bracketing amount will be displayed
as each bracketed shot is taken.
The current drive mode (p.82) will be
used for the shooting.
93