Care For Your Trimmer; Pop-Up Trimmer; Replacing The Cutter Assembly; Replacing The Trimmer Comb - Remington MB320C User Manual

Tips for best results

CARE FOR YOUR TRIMMER

Care for your trimmer to ensure a long lasting performance. Your trimmer is fitted with
high-quality, diamond like carbon coated cutting blades that are permanently lubricated.
Cleaning should only be done with a soft brush.
After each use
4
080118_REM_IFU_MB320C.indd 4 080118_REM_IFU_MB320C.indd 4
ENGLISH

REPLACING THE CUTTER ASSEMBLY

Hold the trimmer in one hand. With your other hand, insert the lower part of the cutter
assembly into the trimmer, push down the cutter until firmly attached.

REPLACING THE TRIMMER COMB

Hold the trimmer in one hand with your thumb firmly on the zoom wheel to keep it from
turning. Ensure that the length position indicator is at 1.
Slide the comb/shaver down the grooves until it clicks into place.
Note: The trimmer comb attachment can only be placed on the trimmer one way; if it
does not fit properly remove and reverse it.
Beard, moustache and sideburn hairs should be dry.
Avoid using lotions before using your trimmer. Comb your hair in the direction that it
grows.
Remove trimmer comb attachment if you are: defining hairline edges such as sideburns,
trimming the nape of your neck, trimming your beard line on front of neck.
CLEANING AND MAINTAINING YOUR TRIMMER
Turn the trimmer off.
Remove trimmer comb attachment and cutter assembly.
Gently brush the remaining hairs away from the trimmer comb and trimmer blade.
Do not rinse the cutter assembly under water.

POP-UP TRIMMER

Remove the trimmer comb attachment.
Slide up the pop-up trimmer into operating position (DIAGRAM F)
Brush hair from the trimmer blades and the surrounding area.
16.04.2008 13:05:11 Uhr 16.04.2008 13:05:11 Uhr