Bosch HIIP054 Use And Care Manual page 41

Induction slide-in ranges
Hide thumbs Also See for HIIP054:
Table of Contents

Advertisement

Available languages

Available languages

3. Bring both door hinge
levers to their fullest
down position as
shown in the
illustration. The left
and right door hinges
differ slightly but
operate in the same
manner.
4. Close the oven door
until it catches on the
hinge stop levers. The
door will be open
about 7 inches at the
top. This takes the
spring tension off the
hinges so the door can
be easily lifted out.
5. The door is heavy.
Use both hands to
firmly grip it by the
sides and lift the door
up until the hinges
clear the slots in the
oven housing.
6. Place the door in a
convenient and stable
location for cleaning.
To replace the oven door:
1. Holding the door firmly
in both hands, place
hinges in hinge slots.
2. Catch the small slot at
the base of the hinge
(A) in the bottom of the
hinge slot (B) in the
oven body. Then tilt
the door inward and
slide the hinges into
place. The door
should catch at this
point and remain firmly
attached to the oven
body.
3. Open the door all the
way to expose the
hinges and slots.
4. Push both hinge
levers down and away
from you until flush
with the face of the
oven body.
5. Close and open door
slowly to be sure it is
correctly and securely
in place. Door must be
straight, not crooked.
English 38

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents