To Check The Programmed Tracks; To Add A Track To The Program; To Change A Track In The Program; To Clear Tracks From The Program - Kenwood CD-2280M Instruction Manual

To check the programmed tracks

To add a track to the program

1 Set the Mechanism-A to stop mode.
2 Perform steps 2 and 3 of "Program-
ming tracks in desired order".

To change a track in the program

1 Set the Mechanism-A to stop mode.
2 Press the CHECK key.
3 Perform steps 2 and 3 of "Program-
ming tracks in desired order".

To clear tracks from the program

To clear tracks from the end
÷ Each time the key is pressed, the last track in the program is cleared.
÷ The tracks which are programmed earlier than the track being played
cannot be cleared.
SPACE/
CHECK
^
SPACE/
CHECK
^
DELETE/
CLEAR
Programming tracks in desired order (PGM mode) (Mechanism-A only)
: Keys and controls used in the operations described on this page.
DISPLAY-A
P G M 0 1 E
÷ Each time the key is pressed, the program No. (P-NO) and the disc No.
are displayed.
÷ The previous display resumes in a few seconds.
÷ When a track No. is entered, the track will be added to the end of the
existing program.
÷ Press the CHECK key repeatedly until the track No, to be changed is
displayed.
DISPLAY-A
P G M 0 1 E
Example
≠
÷ Press it while the "PGM01" indicator blinks.
÷ The track being played cannot be changed.
To clear all tracks
÷ When the P.MODE key is pressed during playback, playback in order of
tracks starts from the track being played.
CD-2280M/DPF-J9010 (En)
D D 2 0 0 D T 3 0
D D 2 0 0 D T 3 0
CHARACTER/
P.MODE
17