Normal Play (Track Mode); Playing Tracks In Order From Track No.1 - Kenwood CD-2280M Instruction Manual

Normal play
12
Preparation
÷ Load discs into the carousel.
÷ Select the Mechanism-A or Mechanism-B.

Playing tracks in order from track No.1

Use the following procedure to play a CD in the original
order of tracks from track No.1.
1
Select the disc.
Previous disc
Go to step 2 within 8 sec.
2
Start playback.
To pause playback
÷ Each press pauses and plays the CD alternately.
In regard to SUB OUT MONITOR
(TRACK mode)
0
!
∞ DISC SKIP 5
Next disc
6
6
SUB OUT
MONITOR
: Keys and controls used in the operations described on this page.
÷Each press of a key increases (or decreases)the disc number. Holding
the key depressed varies the disc numbers successively.
÷When the disc corresponds to CD-TEXT, or when the disc title has been
registered, the disc title will be displayed with scrolling. Discs can be
selected while looking at the registered contents.
"Registration of Title Name"
Display when disc No. 123 is selected
D 1 2 3
Lights up.
D I S C 1 3 2
÷ When the disc corresponds to CD-TEXT, or when the track titles have
been registered, the track title will be displayed with scrolling.
÷ If the selected disc is being played on the other mechanism, blinking
"DISCXXX BUSY!" is displayed and the disc will not be played.
For continuous playback
Press the CONTINUOUS PLAY key.
To stop playback
Press the SUB OUT MONITOR key to output the audio played on
Mechanism-B from OUTPUT-A. Each press of the key switches
this feature on and off alternately.
DISPLAY-A
S U B O O U T
÷ This operation is not available during the continuous play mode.

Normal play (TRACK mode)

CD-2280M/DPF-J9010 (En)
)
1 : 2 3
T R A C K 1 0
7
N M O N I T R O