To Check The Programmed Tracks; To Change A Track In The Program; To Clear Tracks From The Program - Kenwood DPF-J3030 Instruction Manual

To check the programmed tracks

SPACE
/CHECK
To add a track to the program
1 Set the CD player to stop mode.
2 Perform steps 2 and 3 of "Programming tracks in
desired order".

To change a track in the program

1 Set the CD player to stop mode.
2 Press the CHECK key.
SPACE
/CHECK
3 Perform steps 2 and 3 of "Programming tracks in
desired order".

To clear tracks from the program

To clear tracks from the end
DELETE
/CLEAR
÷ Each time the key is pressed, the last track in the program is cleared.
÷ The tracks which are programmed earlier than the track being played
cannot be cleared.
P G
÷ Each time the key is pressed, the program No. and the disc No. are
displayed.
÷ The previous display resumes in a few seconds.
÷ When a track No. is entered, the track will be added to the end of the
^
existing program.
÷ Press the CHECK key repeatedly until the program No, to be changed
is displayed.
P G
^
÷ Press it while the "PGM01" indicator blinks.
÷ The track being played cannot be changed.
To clear all tracks
÷ When the P.MODE key is pressed during playback, playback in order of
tracks starts from the track being played.
Programming tracks in desired order (PGM mode)
M 0 1 D 0 E 2 0
M 0 1 D 0 E 2 0
Example
≠
CHARAC.
/P.MODE
17
T 3 D 0
T 3 D 0