Soleus Air HCB-R135-A-ID Installation And Operating Instructions Manual page 13

REMOTE CONTROL OPERATING INSTRUCTIONS(CONTINUED)
6) TIMER - To program the timer, first press the T-ON button. Once T-ON is pressed the auto-on timer
will blink in the bottom right rectangle of the remote control display. Press the MIN and HOUR buttons
to change the clock to the desired time for the unit to automatically turn on. The minutes will increase
by 10 with each press of the MIN button and the hours will increase by 1 with each press of the HOUR
button. Press the T-OFF button and the remote control display will flash the desired auto-off timer.
Press the MIN and HOUR buttons to change the clock to the desired time for the unit to automatically
turn off. The timer is set when the auto-off time stops flashing and the words "ON" and "OFF" are dis-
played next to the time.
7) AUTO SWING - This function is not available.
13