Soleus Air HCB-R135-A-ID Installation And Operating Instructions Manual page 12

REMOTE CONTROL OPERATING INSTRUCTIONS
1) Power On and Off - If the unit is already on, press the
remote away from the unit. This will turn the remote on. If the unit is off, press the
manually turn the unit on. Press the
button the upper right square on the remote control LCD display will light up. When in Air Conditioner
mode and Auto mode, the selected temperature will appear on the remote control LCD display. When
the unit is in Fan mode and Dehumidifier mode you will see "- -" icon instead of the set temperature.
This shows that temperature selection is not available when the unit is in Fan or Dehumidifier mode.
2) Mode Selection - Press the MODE button repeatedly to cycle between the different modes: Auto
mode, Air Conditioner, Dehumidifier, and Fan-Only mode. The upper left square on the Remote con-
trol display will light up showing which mode is selected. In Air Conditioner mode the display will
show "COOL", in Dehumidifier mode the display will show "DRY", in Fan mode the display will
show "FAN", and in Auto mode the display will show "AUTO".
3) Fan Speed - Press the FAN speed button to cycle through Auto, High, Medium, Low fan speeds. The
display on the remote control will show High, Medium, Low, under the "SPEED" label on the remote
control LCD display. There is an additional AUTO speed setting that is enabled in only cooling mode.
This speed is the next setting after Low when pressing the FAN speed button on the remote control.
The speeds will cycle through this order: High, Medium, Low, Auto. Each change in speed will be
associated with a "beep" sound from the unit. The remote control will not display "AUTO" under the
speed label. Once Auto fan is selected the unit will beep and there will not be a fan speed displayed on
the remote control.
4) Temperature Setting - When the unit is in Air Conditioner mode and Auto mode, Press the + or − to
select your desired temperature setting. The temperature on the LCD display on the remote control will
increase or decrease accordingly. Press and hold + and − simultaneously for 2 seconds to switch be-
tween Celsius and Fahrenheit.
5) SLEEP MODE -(This mode can only be selected when using the remote control).
a) To set Sleep mode, make sure the unit is in Air Conditioner mode.
b) Press the SLEEP Button on the remote control, the
c) When in SLEEP mode, the fan will run on low to keep fan noise at a minimum. Sleep mode can be
set up to 8 hours, when 8 hours is reached or Sleep mode is canceled, the unit will switch to previous
set mode.
d) When in Air Conditioner mode, the temperature setting will gradually increase to 1°F above the
original set temperature for each of first 2 hours. The unit will keep operating the same temperature
for 6 hours and switch to set temperature.
e) Control panel LCD display and all indicator lights on control panel will turn off 5 seconds after
SLEEP mode is set. Press any button on control panel or remote control to turn on LCD display and
all indicator lights again.
button once more to turn the unit off. When you press the
icon appears on the remote control display.
12
button on the remote while pointing the
button once to