Hughes DW4020 Installation Manual page 96

8. Connect up to four Ethernet cables to the network ports on
the Gateway (see Figure 60). Either a straight-through or a
cross-over Ethernet cable can be used. The four ports labeled
1 through 4 are Ethernet 10 Base - T/100 network ports. They
enable you to connect to other computers via an Ethernet
connection. (Reference UL 60950, Annex NAA, Subclause
reference 6, page 322.)
Receive
modem
Transmit
modem
Gateway
T0091012
Figure 60: Attach network cables
9. Attach the power supply cords to the power supply and to the
power supply adapter. Ensure that the power cord is tightly
connected to the power supply, modem, and Gateway (see
Figure 61). The final assembly is shown in Figure 62.
Appendix C • Installing the DW4020 Manually
Network
cable
Four 10 Base - T/100 -Tx
network ports
1031484-0001 Revision 2
Connect up
to four Ethernet
cables
83