Table of Contents
Advertisement
12. Select the
Manual
13. Select Start Test. Adjust the antenna to achieve maximum
transmit isolation.
14. When the unit consistently passes the manual transmit test,
bolt the antenna securely before going to Step 15.
15. After the antenna is bolted, select
16. Then select the
Automatic
to start the automatic ACP test. See Figure 29.
17. Make sure the test passes.
18. Select Exit after passing the test.
Figure 28: Manual cross-pol passed; select Stop Test
Figure 29: Auto cross-pol
Chapter 2 • Installing the indoor equipment
fine pointing mode radio button.
Stop Test
radio button and select Start Test
1031484-0001 Revision 2
. See Figure 28.
29
Advertisement
Table of Contents
