Adjustment Of The Tape Transport Section - Sanyo HV-DX300A Service Manual

ADJUSTMENT OF THE TAPE TRANSPORT SECTION.

Generally, tape transporting section has been precisely adjusted in the factory and does not require the ordinary readjustment.
But there is the case that tape noise or impact on the deck mechanism, tape transporting section readjustment is required. In
adjustment of the tape transmission section refer to the following flow chart.
FIg.5.1 A schematic diagram of the tape transport ing section.
If any components shown in Fig. 5.1 are changed, readjustment of the tape transporting section is needed.
19