Dta (Digital Time Alignment) Setting; X'over Setting - Kenwood eXcelon KDC-X993 Instruction Manual

Sound Setup

DTA (Digital Time Alignment) setting

Adjusting fine tuning of the speaker position
compensation value specified at <Cabin selection>
(page 29).
1
Enter DTA setting mode
>
Select "SOUND" "Setup"
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the speaker you want to set
Setting speaker
Front speaker
Rear speaker
Subwoofer
Turn the Control knob.
3
Set the compensation value of the speaker
position
Turn the Control knob and push the center
when the desired value is displayed.
Adjust between 0 and 14.44 feet.
Refer to "DTA" of <Menu Glossary> (page 48) on
how to set the compensation value.
Exit DTA setting mode.
30
|
KDC-X993/ KDC-HD942U/ KDC-X693/ KDC-MP642U
>
"DTA".
Display
"Front"
"Rear"
"SW"

X'Over setting

Fine adjusting the following setting values
corresponding to the X'Over values set in the
section <Speaker Setting> (page 29);
Adjustment Item Display
Front High Pass Filter, "FC"
Rear High Pass Filter
Front High Pass Slope, "SLOPE"
Rear High Pass Slope,
Subwoofer Slope *
Subwoofer Low Pass "FC"
Filter
Subwoofer Phase "PHASE"
*Function of the KDC-X993/ KDC-X693.
1
Enter X'Over setting mode
>
Select "SOUND" "Setup"
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the speaker you want to set
Setting speaker
Front speaker
Rear speaker
Subwoofer
Turn the Control knob and push the center
when the desired item is displayed.
3
Select the item you want to set
Item Setting overview
"Front" >"FC" Front High Pass Filter
>"SLOPE" Front High Pass Slope
"Rear" >"FC" Rear High Pass Filter
>"SLOPE" Rear High Pass Slope
"Subwoofer" >"FC" Subwoofer Low Pass Filter
>"SLOPE" Subwoofer Slope
>"PHASE" Subwoofer Phase
Push the Control knob towards up or down.
4
Set the X'Over value
Turn the Control knob.
5
Repeat steps 2 to 4 to complete the X'Over
setting.
6
Exit X'Over setting mode
Press the [FNC] button.
Range
Through, 30*, 40, 50*, 60, 70,
80, 90*, 100, 120, 150, 180,
220, 250* (Hz)
-6, -12, -18, -24 dB/Oct
30*, 40, 50*, 60, 70, 80, 90*,
100, 120, 150, 180, 220,
250*, Through (Hz)
Reverse (180°)/ Normal (0°)
>
"X'Over".
Display
"Front"
"Rear"
"Subwoofer"