Sound Setup; Cabin Selection; Speaker Setting - Kenwood eXcelon KDC-X993 Instruction Manual

Sound Setup

Cabin selection

You can compensate the delay of the sound arrival
time by selecting your environment from the
following car types;
Car type
Not compensating.
Compact car
Full size car
Station wagon
Minivan
Sport-utility vehicle
Long Minivan
1
Enter Cabin select mode
>
Select "SOUND" "Setup"
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the car type
Turn the Control knob and push the center
when the desired item is displayed.
Exit Cabin select mode.
⁄
• You can compensate the distances in more details by
using <DTA> (page 30) function.

Speaker setting

The speaker X'Over is automatically set when the
position and size of each speaker are selected from
the following items;
Item
Speaker Size Front
Speaker Location Front
Speaker Size Tweeter
Speaker Size Rear
Speaker Location Rear
Speaker Size Subwoofer
1
Enter Speaker setting mode
>
Select "SOUND" "Setup"
Display
"OFF"
"Compact"
"Full size car"
"Wagon"
"Minivan"
"SUV"
"Minivan (Long)"
>
"Cabin".
Range
"O.E.M. " , "4inch", "5inch", "6 1/2inch",
"6 3/4inch", "7inch", "4x6", "5x7", "6x8",
"6x9", "7x10"
"Door", "On Dash", "Under Dash"
"None", "Use"
"None", "O.E.M. " , "4inch", "5inch",
"6 1/2inch", "6 3/4inch", "7inch", "4x6",
"5x7", "6x8", "6x9", "7x10"
"Door", "Rear Deck"
"Minivan", "Minivan (Long)":
"2nd Row", "3rd Row"
"None", "6 1/2inch", "8inch", "10inch",
"12inch", "15inch Over"
>
"Speaker".
For how to select Function Control item, refer to
<Function Control> (page 6).
2
Select the speaker you want to set
Setting speaker
Front speaker
Rear speaker
Subwoofer
Turn the Control knob.
3
Select the item you want to set
Item Setting overview
"FRONT" >"SIZE" Speaker Size Front
>"LOCATION" Speaker Location Front
>"TWEETER" Speaker Select Tweeter
"REAR" >"SIZE" Speaker Size Rear
>"LOCATION" Speaker Location Rear
"SUB W" >"SIZE" Speaker Size Subwoofer
Push the Control knob towards up or down.
4
Set the value
Turn the Control knob.
5
Repeat steps 2 to 4 to complete the speaker
settings.
6
Exit Speaker setting mode
Press the [FNC] button.
Display
"FRONT"
"REAR"
"SUB W"
29
|
English