Adjusting The Volume; Attenuating The Sound; Monitor Panel Operations - Kenwood DDX7018BT Instruction Manual

Basic Operations Basic Operations

Adjusting the volume

DDX7018BT DDX718WBT
DDX7018BTM DDX718WBTM
DMX7018BT DMX718WBT
DMX7018BTM DMX718WBTM
You can adjust the volume (00 to 40) by pressing
increase and pressing K to decrease.
J
• Holding increases the volume continuously to
level 15.

Attenuating the sound

DDX7018BT DDX718WBT
DDX7018BTM DDX718WBTM
DMX7018BT DMX718WBT
DMX7018BTM DMX718WBTM
(Hold)
The ATT indicator lights up.
To cancel attenuation: Press and hold the same
button again.

Monitor panel operations

1
Display the <Angle Adjust> screen.
DDX7018BT/DDX7018BTM:
DMX7018BT/DMX7018BTM/DDX718WBT/
DDX718WBTM/DMX718WBT/DMX718WBTM:
J to
Press MENU on the monitor panel to display the
pop-up short-cut menu, then touch [Angle].
2
Perform the adjustment or operation.
E.g. Angle adjust screen for DDX7018BT
(Hold)
[0] – [6] Selects a monitor angle.
(The monitor panel will stay in
this angle when you turn on
the unit.)
<Off Position> Sets the angle of the monitor
panel you want when you
turn off the unit or the ignition
switch of the vehicle.
• Select the monitor angle,
then touch [Memory].
[ M DISC EJECT] (Only for DDX7018BT/
DDX7018BTM/DDX718WBT/
DDX718WBTM)
(Touch) Ejects the disc.
To return the monitor panel to
the selected angle:
Press M on the monitor panel.
• To return to the previous screen, touch [
setting screen.
] on the
ENGLISH 5