Deactivating Security Code; Ipod Setup - Kenwood DDX5034M Instruction Manual

Deactivating Security Code

To deactivate the Security Code function.
1 Display Security Code Setup screen
Touch
Menu" screen (page 56).
2 Start to cancel a registration of the
Security Code
3 Enter a security Code
Input by four-digit number.
4 Register your security code
Now, your security code is cleared.

iPod Setup

Performs setup when using iPod.
1
in the "Setup
2
⁄
• "Wide Screen" cannot be set while the iPod is connected.
Display the iPod SETUP screen
Touch
Menu" screen (page 56).
Setup each item
1
2
3
1 Sets the Audio book playback speed.
2 Sets Wide Screen on or off.
3 Switches the video output signal. Select
from "NTSC" or "PAL".
in the "Setup
English 71