Ipod Control; Connecting An Ipod; Functions When Displaying The Easy Control Panel - Kenwood DDX5034M Instruction Manual

iPod Control

You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301V
(optional accessory). You can also display video contents on this unit when connecting an iPod with video.

Connecting an iPod

Connect an iPod to this unit.
Mode:Full
iPod
2
3
00002/00006
iPod
1 Forward music/video search area
Selects the next music/video.
2 Backward music/video search area
Selects the previous music/video.
3 Information display button area
The information is displayed for 5 seconds.
⁄
• Remove all accessories such as headphone before
connecting an iPod. You may not be able to control the
iPod if you connect it with accessories attached.
• When you connect an iPod to this unit, playback starts
from the song you were playing on the iPod itself
(Resume Function).
• If you start playback after connecting the iPod, the music
that has been played by the iPod is played first.
In this case, "RESUMING" is displayed without displaying
a folder name, etc. Changing the browse item will display
a correct title, etc.
• When the iPod is connected to this unit, "KENWOOD" or
"✓" is displayed on the iPod to indicate that you cannot
operate the iPod.
• If the played song is not a video content, "No iPod Video
Signal" is displayed on the video screen.
Functions When Displaying the Easy
Control Panel
Displays the basic operation buttons on the
screen.
AV–OUT:AV–IN
1
P 0 : 0 0 : 0 5
IN
⁄
• When the navigation screen is displayed, press the [NAV]
• The Easy Control Panel is hidden when you touch a
1 While the source is playing, press the [FNC]
button
Mode:Full
iPod
SCRN
TI
1 1
iPod 00002/00006
1 Music/Video Search.
2 Plays or pauses.
button to switch to the source playback screen.
central part of the monitor.
AV–OUT:AV–IN
2
P 0 : 0 0 : 0 5
.
IN
English 31