Deactivating Security Code - Kenwood DNX5140 - Wide Double-DIN In-Dash Nagivation Instruction Manual

If you have pressed the Reset button or if
you have disconnected the Receiver from
battery...
1 Enter the correct security code
You must enter the same security code as that
you have entered in Step 3.
2 Enter the security code
Now, you can use your Receiver.

Deactivating Security Code

To deactivate the Security Code function.
1 Display Security Code Setup screen
Touch
Menu" screen (page 60).
2 Start to cancel a registration of the
Security Code
3 Enter a security Code
Input by four-digit number.
4 Register your security code
Now, your security code is cleared.
in the "Setup
English
75