Ipod Control; Connecting An Ipod; Functions When Displaying The Easy Control Panel - Kenwood DNX6140 Instruction Manual

iPod Control
You can control and listen to songs in your iPod by connecting an iPod to this unit with KCA-iP301 V
(optional accessory). You can also display video contents on this unit when connecting an iPod with video.
Connecting an iPod
I
Connect an iPod to this unit.
OJ
Forward music/video search area
Selects the next music/video.
[I]
Backward music/video search area
Selects the previous musicivideo.
[l]
Information display button area
The information is displayed for 5 seconds.
Q...
~
Remove all accessories such as headphone before
connecting an iPod. You may not be able to control the
iPod if you connect it with accessories attached.
• When you connect an iPod to this unit, playback starts
from the song you were playing on the iPod itself
(Resume Function).
If you start playback after connecting the iPod, the music
that has been played by the iPod is played first.
In this case, "RESUMING" is displayed without displaying
a folder name, etc. Changing the browse item will display
a correct title, etc.
When the iPod is connected to this unit, "KENWOOD" or
",r
is displayed on the iPod to indicate that you cannot
operate the iPod.
If the played song is not a video content, "No iPod Video
Signal" is displayed on the video screen.
Functions When Displaying the Easy
Control Panel
Displays the basic operation buttons on the
screen.
D
While the source is playing, press the [FNC]
button
OJ
MusicNideo Search.
W
Plays or pauses.
@2
• When the navigation screen is displayed, press the [NAV]
button to switch to the source playback screen.
• The Easy Control Panel is hidden when you touch a
central part of the monitor.
English
:8
31