Gigaset C610IP User Manual page 54

Making calls
Please note
u
If a dialling plan has been defined for the dialled phone number
¢
(
used to establish the connection instead of the send connection.
If the phone number is blocked by a dialling plan, it will not be dialled.
Not possible is displayed.
u
If you use VoIP to make a call to a fixed line, you may also have to dial the area
code for local calls (depending on the provider). You can avoid having to dial
your own area code by entering it in the configuration and activating the
Predial area code for local calls via VoIP option (see Web configurator).
u
You have activated the Automatic Fallback to Fixed Line option with the
Web configurator. If an attempt to make a call via a VoIP connection fails, the
phone automatically attempts to establish the connection via the fixed line.
u
Gigaset.net numbers ending with the suffix #9 are automatically dialled via
the Gigaset.net connection. The calls are free of charge
Selecting a connection at each call
Prerequisite: "Sel. at each call" has been assigned to the handset instead of a send
connection
~ c Enter the number and press the talk key. The list of all the phone's con-
q
§Dial§
/w
If a dialling plan has been defined for the dialled phone number
then the send connection specified in the dialling plan is used.
Please note
You can cancel the dialling process with the end call key a.
u
u
You are shown the duration of the call while the call is in progress.
u
Dialling with the directory
you from repeatedly keying in phone numbers.
u
If you have multiple handsets registered to the base, you can make internal
calls free of charge
Using an alternative connection/connection list on the display key
Prerequisite: you have assigned an "alternative connection" or the list with all con-
figured connections to a display key
§Sel. Line§
q
c/
§Dial§
~
Any dialling plan
number is ignored. The selected send connection is always used.
52
page 192), then the connection specified in the dialling plan will be
¢
( page 167).
nections is displayed.
Select a connection.
Press the display key or the middle of the control key.
(page
Press the display key.
Select a connection.
Press the talk key or display key.
Enter a number. The number is dialled approximately 3.5 seconds after
the last digit is entered.
¢
( page 192)
(page 73) or call and redial list
146).
¢
( page 150).
that has been defined for the dialled phone
¢
( page 57).
¢
( page 192),
(page 68) saves