Gigaset C610IP User Manual page 38

First steps
e.
f.
Instead of a connection, you can also select Sel. at each call. Each time you make a
call, you can then select the connection you wish to use on this handset.
If other handsets are already registered to the base, you are requested to assign
send and receive connections for the handsets. The following is shown in the dis-
play:
Assign connections to handset ?
¤
Perform steps
36
Send Connections
Ð
INT1
sends calls with
Fixed Line:
4560123
Change OK
INT 1
Connection for
outgoing calls:
< IP1 >
Back Save
a. to f. for each registered handset.
The send connection currently set for
the handset is displayed: Fixed Line.
¤
Press the display key
not wish to change the setting.
Skip the following step.
¤
To change the setting, press the
§Change§
display key
If the handset is to make calls via a dif-
ferent connection/phone number:
¤
Press right on the control key v
repeatedly, until the required con-
nection is displayed (in the exam-
ple, IP1).
¤
Press the display key
the settings.
§OK§
if you do
.
§Save§
to save