Removing Your Device From The Motorcycle Mount; Mounting Your Device In An Automobile - BMW Motorrad Navigator V Owner's Manual

2 Tilt your device back until it snaps into place and the top of
the latch is flat.
NOTE: Remove the device from the motorcycle mount before
connecting a battery charger to your motorcycle.

Removing Your Device from the Motorcycle Mount

1
Press the release button
2
Lift out the device.
About the Motorcycle Mount
You can access specific device features using the buttons on
the motorcycle mount.
Select to zoom in and out on the map.
Select to use functionality marked with a
Select to view the map, compass, trip computer, and media player.
Hold to open the brightness settings.
Select to hear the current prompt when you have a Bluetooth ®
helmet or headset connected.
Hold to open the volume settings.

Mounting Your Device in an Automobile

NOTE: The automotive mount is included with the optional car
kit.
Before mounting the device, check the local laws pertaining to
windshield mounting.
This product contains a lithium-ion battery. To prevent the
possibility of personal injury or product damage caused by
battery exposure to extreme heat, store the device out of direct
sunlight.
Do not use the suction cup mount on a motorcycle.
See the Important Safety and Product Information guide in the
product box for product warnings and other important
information.
1
Plug the small end of the automotive power cable
port on the side of the automotive mount
2
on the side of the mount.
or .
NOTICE
WARNING
.
2 Remove the clear plastic from the suction cup.
3
Clean and dry your windshield and the suction cup with a
lint-free cloth.
4
Press the suction cup
back toward the windshield.
5
Snap the mount onto the suction cup arm.
6
Fit the bottom of your device into the cradle.
7 Tilt the device back until it snaps into place.
8
Plug the other end of the automotive power cable into a
power source.
Support and Updates
Garmin ® Express provides easy access to these services for
your device.
• Product registration
• Software and map updates
• Product manuals
• Vehicles, voices, and other extras
Setting Up Garmin Express
1 Plug the small end of the USB cable into the port on the
device.
2
Plug the larger end of the USB cable into an available USB
port on your computer.
3
Go to www.garmin.com/express.
4
Follow the on-screen instructions.
Activating Lifetime Maps
NOTE: Lifetime Maps are not applicable to products that do not
have pre-loaded maps.
NOTE: Lifetime Maps entitle you to receive map updates when
and as such updates are made available by Garmin during the
useful life of one compatible Garmin product or as long as
Garmin receives map data from a third party supplier, whichever
is shorter. For the meaning of a product's "useful life" and for
other important terms and conditions, go to
/numapslifetime.
1
Go to www.garmin.com/express.
2
Follow the on-screen instructions.
NOTE: If you register the device, you can receive e-mail
notifications when a map update is available.
About Sleep Mode
Use sleep mode to conserve battery power when your device is
not in use. Sleep mode uses very little power, and a battery
charge lasts for weeks when your device is in sleep mode.
Entering Sleep Mode
Press the Power key.
Exiting Sleep Mode
While the device is in sleep mode, press the Power key.
Adjusting the Screen Brightness
into the
1
Select Settings > Display > Brightness.
to the windshield, and flip the lever
www.garmin.com
Getting Started