Planning A Trip To Destination - BMW Motorrad Navigator V Owner's Manual

While navigating, the device does not announce your arrival at
each shaping point.

Planning a Trip to Destination

You can use the trip planner to create a trip with a single or
multiple destinations.
1
Select Apps > Trip Planner.
2
Select New Trip.
3 Select Select Start Location.
4
Search for a location (Finding a Location by
5
Select Select.
6
To add a final destination, select
7
Select Next.
8 Enter a name, and select Done.
Adding Points to a Trip
NOTE: Before you can add a shaping point, your trip must
contain a start location, at least one via point, and a final
destination.
While creating or editing a trip, any via point can be changed to
a shaping point and any shaping point can be changed into a
via point.
1
Select Apps > Trip Planner.
2
Select New Trip.
3
Select Select Start Location.
4 Search for a location (Finding a Location by
5
Select Select.
6
Select to add a final destination.
7
Select to add at least one via point.
Via points are indicated by an orange flag.
8
If necessary, select the orange flag next to a via point to
change it to a shaping point.
Shaping points are indicated by a blue dot.
9
Select Next.
10
Enter a name, and select Done.
Scheduling a Trip
You can use the trip planner to create and save a trip with
multiple destinations.
1
Select Apps > Trip Planner.
2
Select a trip.
3 Select a location.
4
Select an option:
• Select Departure Time.
• Select Arrival Time.
5
Select a date and time, and select Save.
6
Select Duration.
7
Select the amount of time you will spend at the location, and
select Save.
8
If necessary, repeat steps 3–7 for each location.
Changing Transportation Modes in a Trip
You can change the transportation modes used to travel in a
saved trip.
1
Select Apps > Trip Planner.
2
Select a trip.
3
Select > Transportation Mode.
4 Select a transportation mode.
5
Select Save.
Using the Apps
Category).
.
Category).
Navigating to a Saved Trip
1
Select Apps > Trip Planner.
2
Select a saved trip.
3
Select Go!.
4
If prompted, select a route.
Editing a Saved Trip
1
Select Apps > Trip Planner.
2
Select a saved trip.
3
Select .
4
Select an option:
• Select Rename Trip.
• Select Edit Destinations to add and delete a location, or
to change the order of locations.
• Select Delete Trip.
• Select Optimize Order to arrange the stops on your trip
in the most-efficient order.
TracBack ®
Following Your Recent Track
The TracBack feature records a track of your recent movement.
You can retrace your recent track back to where you started.
1
Select TracBack.
Your recent track appears on the map.
2
Select Go!.
Saving Your Recent Track as a Trip
You can save your recent track as a trip, which you can
navigate later using the trip planner.
1
Select TracBack.
Your recent track appears on the map.
2 Select Save as Trip.
3
Enter a name, and select Done.
Using the Compass
NOTE: You must be moving for the compass to determine your
direction.
You can navigate using a GPS compass.
Select Apps > Compass.
Viewing Previous Routes and Destinations
Before you can use this feature, you must enable the travel
history feature.
You can view your previous routes and locations where you
have stopped on the map.
Select Apps > Where I've Been.
Using the World Clock
1
Select Apps > World Clock.
2
If necessary, select a city, enter a city name, and select
Done.
Viewing the World Map
Select Apps > World Clock >
Nighttime hours appear in the shaded area of the map.
Setting an Alarm
1
Select Apps > Alarm Clock.
2 Set a time.
3
Select the Alarm On check box.
.
9