Device Care - BMW Motorrad Navigator V Owner's Manual

Device Care

Avoid dropping your device.
Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Your device contains sensitive electronic components that can
be permanently damaged when exposed to excessive shock or
vibration that exceeds normal motorcycle or automobile use. To
minimize the risk of damage to your device, avoid dropping and
operating it in extreme high-shock and high vibration
environments.
Cleaning the Outer Casing
Avoid chemical cleaners and solvents that can damage plastic
components.
1 Clean the outer casing of the device (not the touchscreen)
using a cloth dampened with a mild detergent solution.
2
Wipe the device dry.
Cleaning the Touchscreen
1
Use a soft, clean, lint-free cloth.
2 If necessary, lightly dampen the cloth with water.
3
If using a dampened cloth, turn off the device and disconnect
the device from power.
4
Gently wipe the screen with the cloth.
Avoiding Theft
• Remove the device and mount from sight when not in use.
• Remove the residue left on the windshield by the suction
cup.
• Do not keep your unit in the glove compartment.
• Register your device at http://my.garmin.com.
Extending the Battery Life
• Keep your device away from extreme temperatures.
• Put the device in sleep mode
• Decrease the screen brightness.
• Do not leave your device in direct sunlight.
• Disable Bluetooth (Disabling
• Shorten the display timeout time.
Replacing the Battery
If you need to replace the battery in the device, contact your
BMW Motorrad dealer. Contact your local waste disposal
department for information about proper disposal of the battery.
Locking the Device
Garmin Lock is a theft-deterrent system that locks your device.
Each time you turn on the device, enter the 4-digit PIN or drive
to the security location.
1
Select Settings > Device > Garmin Lock.
2 Select Lock Device.
Changing the Fuse in the Vehicle Power
Cable
NOTE: The vehicle power cable is an optional accessory.
When replacing the fuse, do not lose any of the small pieces
and make sure they are put back in the proper position. The
Appendix
NOTICE
NOTICE
(Entering Sleep Mode).
Bluetooth).
NOTICE
vehicle power cable does not work unless it is assembled
correctly.
If your device does not charge in your vehicle, you may need to
replace the fuse located at the tip of the vehicle adapter.
1
Unscrew the end piece
2
Remove the end piece, the silver tip
3
Install a 3 A fast-blow fuse.
4
Place the silver tip in the end piece.
5
Screw the end piece back into the vehicle power cable
Purchasing Additional Maps
1 Go to your device product page at (www.garmin.com).
2
Click the Maps tab.
3
Follow the on-screen instructions.
Safety Cameras
Garmin is not responsible for the accuracy of or the
consequences of using a custom point of interest or a safety
camera database.
Safety camera information is available in some locations. Check
www.garmin.com/safetycameras
locations, you can purchase a subscription for safety camera
information. The subscription includes the locations of hundreds
of safety cameras. Your device alerts you when you are
approaching a safety camera and can warn you if you are
driving too fast. The data is updated at least weekly, so you can
update your device regularly to receive the most up-to-date
information.
You can purchase a new region or extend an existing
subscription at any time. Each region that you purchase has an
expiration date.
Custom Points of Interest
Custom POIs are customized points on the map. They can
contain alerts that let you know if you are near a designated
point or if you are traveling faster than a specified speed.
Installing POI Loader
You can create or download custom POI lists on your computer
and install them on your device using POI Loader software.
1
Go to www.garmin.com/poiloader.
2
Follow the on-screen instructions.
Using the POI Loader Help Files
For more information on the POI loader, refer to the Help file.
With the POI loader open, click Help.
Finding Custom POIs
Before you can find custom POIs, you must load custom POIs
on your device using the POI Loader software
Loader).
1
Select Where To? > Categories.
2
Scroll to the Other Categories section, and select a category.
Purchasing Accessories
Go to http://buy.garmin.com.
.
, and the fuse
NOTICE
for availability. For these
(Installing POI
.
.
13