With Programme Service Name; Rds Features - Kenwood KRC-PS979R Instruction Manual

Tuner features
Preset station seek with Programme service
name
You can search for the preset station with Programme Service
name.
1
Press the DNPP button on the remote control.
"SNPP" will be displayed once the seek mode is entered.
The names of the stations preset in the band currently listened
to are displayed for 5 seconds each.
The display band switches in the following order:
= FM1 Ô FM2 Ô FM3 Ô AM +
Each time you press the ¢ button, the station display
switches in the forward direction.
Each time you press the 4 button, the station display
switches in the reverse direction.
Stations which have no names will be displayed as
frequencies.
NOTE
Changing the Displayed Band
Pressing the FM button switches between the FM1, FM2, FM3
and AM displays, in that order.
Pressing the AM button switches between the displays in the
reverse direction.
2
Once the name is displayed for the station you want to
listen to
Press the OK button.
Reception starts of the displayed station, and the seek mode
ends.
Cancelling mode during input:
Press the DNPP button.
The seek mode is cancelled.
(Function of Remote Control)
— 20 —

RDS features

PTY
DISP CLK
TI indicator
Radio text
Description about this indicator for these features can be
displayed by setting the Lower Part Display (page 11) to
"... + Function indicator".
FM
TI/VOL ADJ AM
Program service name