Low-Pass Filter Frequency For Non-Fading Output; Phase For Non-Fading Output; Volume Offset - Kenwood KRC-PS979R Instruction Manual

Audio control features

Low-pass Filter Frequency for Non-Fading Output

Adjust the frequency of the Low-pass filter for Non-Fading
output.
Display and setting:
"LPF NF" : 50 Hz / 80 Hz / 120 Hz / Through
NOTE
• This mode is available only when the non-fading output function
is set to on.
• Not available during the Dual zone system is on.

Phase for Non-Fading Output

Adjust the phase for Non-Fading output.
Display and setting:
"NF Phase" : Normal (0°) / Reverse (180°)
NOTE
• This mode is available only when the non-fading output function
is set to on.
• Not available during the Dual zone system is on.

Volume Offset

Set the sound level of the each source selected by adjusting
the level difference between the basic sound level and the
required level.
Display and setting:
"Volume Offset" : - 8 – ± 0
Tuner features
NAME
Preset station number
Band display
ST indicator
Description about this indicator for these features can be
displayed by setting the Lower Part Display (page 11) to
"... + Function indicator".
— 18 —
SRC
FM
AM
#1 ~ 6
Frequency