Table of Contents
Advertisement
removed from the vehicle, personalizing this unit is by using the
Security Code is a help in preventing theft.
When the Security Code function is activated, the code can't be
changed and the function can't be released.
Note, the Security Code can be set as the 4 digit number of your
choice.
1
Enter Standby
Press the [SRC] button.
Select the "ALL OFF" display.
2
Enter Menu mode
Press the [MENU] button for at least 1 second.
When "MENU" is displayed, "Security" is displayed.
3
Enter Security Code mode
Press the [4] or [¢] button for at least 1 second.
When "ENTER" is displayed, "CODE" is displayed.
4
Enter the Security Code
Press the [#1] — [#4] button.
Example: If the Security Code is "3510".
Step
Button
1
[#1]
2
[#2]
3
[#3]
4
[#4]
5
Confirm the Security Code
Press the [DISP] button for at least 3 seconds.
When "RE-ENTER" is displayed, "CODE" is displayed.
6
Do the step 4 and 5 step operation, and reenter the security
code.
"APPROVED" is displayed.
The Security Code function activates.
When a Code different from step 4 is entered, repeat from step 4.
#Times pressed
Display
4
"3"
6
"5"
2
"1"
1
"0"
Press the Reset button and when it's removed from the
battery power source
1
Turn the power ON.
2
Do the step 4 and 5 operation, and enter the Security Code.
"APPROVED" is displayed.
The unit can be used.
Touch Sensor Tone
Setting the operation check sound (beep sound) ON/OFF.
Display
"Beep ON"
"Beep OFF"
— 19 —
Setting
Beep is heard.
Beep canceled.
Advertisement
Table of Contents
