Enjoying Bluetooth - Panasonic SC-XH385 Owner's Manual

Enjoying Bluetooth

Panasonic bears no responsibility for data
and/or information that is compromised
during a wireless transmission.
∫ Restrictions of use
≥ All devices must conform to standards set by
Bluetooth SIG, Inc.
≥ Usage with all Bluetooth
guaranteed.
≥ Depending on the specifications and settings of
a device, it can fail to connect or some
operations can be different.
≥ This system supports Bluetooth
features. But depending on the operating
environment and/or settings, this security is
possibly not sufficient. Transmit data wirelessly
to this system with caution.
≥ This system cannot transmit data to a
Bluetooth device.
®
≥ The environment, obstacles, and interference
may shorten the communication range or cause
incorrect operation, such as audio interruptions.
≥ Do not use this system near an equipment or in
an environment that is sensitive to radio
frequency interference (example: airports,
hospitals, laboratories, etc).
®
devices is not
®
security
®
Bluetooth operations
®
By using the Bluetooth
listen to the sound from the Bluetooth
wirelessly.
Refer to the operating instructions of the
Bluetooth device for details.
®
1
Turn on the Bluetooth
device.
2
Press [ ].
≥ If "Panasonic XH" is displayed on the
Bluetooth menu of the device, go to step 4.
®
3
Press and hold [jPAIRING].
≥ "PAIrIng" will be displayed on the unit's
display and the unit will enter pairing
standby mode.
≥ If another Bluetooth
connected, the connection will be
terminated automatically.
4
Select "Panasonic XH" from the
Bluetooth menu of the device.
®
≥ If another Bluetooth
connected, disconnect it.
≥ "ConnEctEd" will be displayed on the unit's
display and the connection will be
established.
5
Start play on the Bluetooth
≥ If prompted for the passkey, input "0000".
≥ You can register up to 8 devices with this system. If a 9th
device is paired, one of the other registered devices will be
replaced.
≥ This system can only be connected to one device at a time.
≥ When "BLUEtOOtH" is selected as the source, this system
will automatically try and connect to the last connected
Bluetooth device. If the connection attempt fails, try to
®
establish a connection again.
≥ If you switch the source, the Bluetooth
disconnected.
≥ If the image and sound are out of sync during playback,
restart the playback application you are using. If the
problem persists, connect the Bluetooth
unit with an audio cable.
≥ "Bluetooth Standby" ( 17)
connection, you can
®
device
®
feature of the
®
PAIRING
device is already
®
device is already
®
CONNECTED
device.
®
device will be
®
device and this
®
VQT5F18
11