Discharge Chute - Ariens snow-thro 924124-128 Service Manual

1
2

9.4 DISCHARGE CHUTE

WARNING: DO NOT put hands or feet near
or under rotating parts. Keep clear of
discharge opening at all times.
WARNING: NEVER direct discharge of
material toward bystanders nor allow anyone
in front of equipment while unit is in operation.
Be familiar with area of operation.
Install Discharge Chute-Electric Rotation (924517)
1. Remove chute motor cover (Figure 29).
2. Remove the six nuts from ring gear (Figure 28).
3. Remove two half rings.
4. Position discharge chute over threaded studs with
the chute opening facing the electric motor.
5. Replace the half rings.
6. Replace the six nuts and tighten to 120 lbf-in.
(13.56 Nm) torque.
7. Replace chute motor cover.
5
4
Figure 27
9 - 32
1. Idler Pulley
2. Rake Shaft Bushing
3. Shear Bolt
4. Ball Bearing
3
5. Bearing Flange
1
2
Figure 28
PS1091
3
1. Ring Gear Nuts
2. Half Rings
3. Discharge
Chute
OS1930