Before You Begin - Razor A-type Owner's Manual

BEFORE YOU BEGIN

BEFORE YOU BEGIN
Remove contents from box. Inspect the contents of the box for scratches and/or dents that may have occurred during
shipping. Because your scooter was partially or fully assembled and packed at the factory, there should not be any
problems, even if the box has a few scars or dents.
T-bar
Collar clamp
Required Tools
5 mm
Allen wrench
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
Quick-release lever
(select models)
Extension tube
(select models)
Joint release lever/
pivoting mechanism
(select models)
Brake
Steering column adjusting screw (A4 only)
2
WARNING: DO NOT USE
NON-RAZOR PRODUCTS WITH
YOUR SCOOTER.
Razor scooters have been built to
certain Razor design specifications.
The original equipment supplied at
the time of sale was selected on
the basis of its compatibility with
the frame, fork and all other parts.
Certain aftermarket products may
not be compatible and will void the
warranty.
Product ID Locations:
1. Side of deck plate
2. Box - side of UPC (not shown)
Box Contents:
• Scooter
• Allen wrench
• Owner's manual