Subwoofer Output - Kenwood KDC-PSW9527 Instruction Manual

• When the 'Dual Zone System' is ON, each of the
following setup is ignored.
- "WOW"/ "PLII"/ "POSI"/ "PHASE"
('Audio control' (KDC-PSW9527/W9027) (page 26))
- "X'over"/ "EQ"/ "DTA"
('Audio Setup (PRO mode)' (page 30))
- System Q
('System Q' (KDC-PSW9527/W9027) (page 21))
- WOW/ X'OVER
('Audio Control' (KDC-W8027) (page 22))
• The Dual Zone System can be used only when you
have set the rear speaker to any mode other than
"None" in the 'Audio Setup (Easy mode)' (page 28).

Subwoofer Output

Turning the Subwoofer output ON or OFF.
Press the [SW] button for at least 1 second.
Each time the button is pressed Subwoofer
output switches ON or OFF.
When it's ON, "SUB WOOFER ON" is displayed.
25
|
English