Panel Action Setting; System Q Setting(Kdc-W8027); Audio Setup (Kdc-Psw9527/Kdc-W9027); Built-In Amp Mute Setting - Kenwood KDC-PSW9527 Instruction Manual

Menu system
In Standby mode

Panel action setting

Sets the panel movement when the panel action
(back/forward movement) is set to its most end
position.
Display Setting
"Panel Control:1" No angle can be adjusted if the panel position
has been set to its most end position. Also, if you
have set the angle below the horizontal position,
the angle is set to horizontal when you set the
panel to its most end position.
"Panel Control:2" The angle can be adjusted regardless of the
panel position.
Function of the KDC-W8027
System Q Setting
Setting whether the display indicates the System
Q factors (Bass center frequency, Bass Q factor,
Bass extend, Middle center frequency, Middle
Q factor, and Treble center frequency) in Audio
control.
Display Setting
"System Q: ON" The System Q factors are displayed.
"System Q: OFF" The System Q factors aren't displayed.
Function of the KDC-PSW9527/KDC-W9027
Audio Setup
Switches between the Easy mode and PRO mode
(for detailed setup) during Audio setup.
Display Setting
"Audio Setup:Easy" Selects the quick Audio setup.
"Audio Setup:PRO" Selects the detailed Audio setup.
• Refer to 'Audio Setup (Easy)' (page 28) and 'Audio
Setup (PRO)' (page 30).
"Audio Setup:Easy" : [CABIN] [SP-SEL] [SP-LEV] [CALL]
"Audio Setup:PRO" : [X'over] [DTA] [EQ] [SP-LEV]
[MEMORY] [CALL]
50
|
English
In Standby mode

Built-in Amp Mute Setting

Toggles ON or OFF the mute control on the built-
in amplifier.
Turning ON this control enhances the preout
quality.
Display Setting
"AMP Mute: OFF" The built-in amplifier activates.
"AMP Mute: ON" The built-in amplifier deactivates.
B.M.S. (Bass Management System)
Adjust the bass boost level of the external
amplifier using the main unit.
Display Setting
"AMP Bass: Flat" Bass boost level is flat.
"AMP Bass: +6" Bass boost level is low (+6dB).
"AMP Bass: +12" Bass boost level is mid (+12dB).
"AMP Bass: +18" Bass boost level is high (+18dB).
• Refer to the catalog or instruction manual for power
amplifiers that can be controlled from this unit.
• For amplifiers there are the model that can be set
from Flat to +18 dB, and the model that can be set
from Flat to +12 dB.
When an amplifier that can only be set to +12 is
connected to the unit, "AMP Bass: +18" won't work
correctly even if it's selected.

B.M.S. Frequency Offset

Setting the central frequency boosted by B.M.S.
Display Setting
"AMP FRQ: Normal" Boost with the normal central frequency.
"AMP FRQ: Low" Drop the normal central frequency 20%.