Electrical Installation; Connecting To Coin Mechanism - Whirlpool PROW 0612IIM Installation And Maintenance Manual

ELECTRICAL INSTALLATION

ELECTRICAL INSTALLATION
The washing machine must be connected using
a permanently installed cable through an isola-
ting switch by a qualified electrician.
Power supply
The machine is supplied as single-phase, 230 V,
50 Hz, heat output 3000W and has 16 A.
If an earth leakage circuit breaker is fitted it
must be of type A.
Reconfiguration
The machine can be reconfigured The machine
should be reconfigured as shown in the wiring
diagram underneath the top panel of the mach-
ine.
NOTE!
Electrical connection /reconfiguring must be
carried out by a qualified electrician.
ELECTRICAL INSTALLATION
CONNECTING TO A COIN MECHANISM
Connection to a coin mechanism must be car-
ried out by a qualified electrician.
A special connecting cable is required to con-
nect the machine to a coin mechanism. This
can be ordered as a spare part, art. no. 92 090
95.
Recommendations for choice of coin mechanism
The connecting cable (92 090 95) supplies the
coin mechanism with power (230 V). The coin
mechanism must be able to short-circuit two
signal leads for a period of time (around 0–10
minutes). This is so that the user has time to
load the laundry, select the programme and start
the programme after inserting the coins.
WASHING MACHINE
11